How to Fix iPhone Yellow Battery. However, the battery symbol on your iPhone has all of a sudden gone yellow, and you have no idea why. Other than that, your iPhone is operating normally.
There is no need to be concerned; there is nothing wrong with the battery in your iPhone. In this article, I’ll explain why the battery in your iPhone is yellow, as well as how to change it so that it returns to its regular color.
Low Power Mode Isn’t A Fix
The Low Power Mode on the iPhone is not a solution to the difficulties with the battery; rather, it is a band-aid.
My piece on the topic, which is titled Why Does the Battery on My iPhone Die So Quickly? outlines the steps necessary to make a few adjustments to your iPhone’s settings in order to solve the battery issue for good.
Amazon has various external battery packs that can come in quite helpful if you are going to be gone for a few days and won’t always have access to a charging station for your electronic devices.
How Did My iPhone Battery Turn Yellow In The First Place?
If you are here reading this post, it is quite likely that you did not turn on Low Power Mode on purpose by heading to Settings > Battery on your device.
If you had, you most likely would have recognized the difference the moment it occurred. The following is the typical course of events:
A window will show on your iPhone to alert you that your battery level is becoming low and ask you if you would like to turn on Low Power Mode when the battery level on your iPhone hits 20%. The color of your iPhone’s battery will change to yellow as soon as you hit the Turn On button.
When you recharge your iPhone’s battery to a level that is greater than 80%, Low Power Mode will be turned off automatically.
Why Is My iPhone Battery Yellow?
Because Low Power Mode is active, the battery on your iPhone is showing a yellow color. To return it to its previous state, go to the Settings menu, select Battery, and then hit the switch that is located next to Low Power Mode. When your battery level reaches 80%, Low Power Mode will immediately and automatically turn off.
Adding Low Power Mode To Control Center
You will be able to add a control for Low Power Mode to Control Center on your iPhone if it is running iOS 11 or a later version.
Launch the Settings app and select the Control Center option. To add the Low Power Mode control to Control Center, tap the green addition button that is located to the left of the More Controls section.
Why your iPhone isn’t Ringing and How to Fix it
It’s possible that your iPhone’s settings are misconfigured, there are defects in the software, or there are hardware issues that are preventing it from ringing for incoming calls and texts.
Because of these problems, it is possible that you will accidentally miss essential calls from business or family, which is never a good thing.
Why your iPhone won’t ring
There could be a number of reasons why the ringer on your iPhone isn’t working when incoming calls come in. The following are some of the most widespread ones:
- The speaker port is clogged.
- Your phone is physically damaged.
- Your ringer volume is turned down.
- Your phone is on Do Not Disturb or Airplane mode.
- Your phone is paired with Bluetooth.
- Your phone is infected with malware.
You can give these suggestions a shot if you’re having trouble getting your iPhone to ring when you get a call. How to Fix iPhone Yellow Battery.
Check Your iPhone For Dust, Dirt and Damage
Be sure to inspect your iPhone for any signs of damage, such as dents or cracks, as these can indicate that you need to get a new one.
Check the port for any dust or debris, which can be readily removed by blowing it off or cleaning it with a cotton swab that has been dipped in a drop of rubbing alcohol. After that, test the sound quality of the speaker.
Restart Your iPhone
It’s possible that your phone won’t ring properly unless you give it a simple restart.
- To restart your iPhone X, 11, 12, or 13:
- Press and hold either Volume button and the side button (on the right side of your iPhone) until the Power off slider appears.
- Drag the slider, then wait 30 seconds for your device to turn off.
- To turn your device back on, press and hold the side button until you see the Apple® logo.
- To restart your iPhone SE (2nd or 3rd generation), 6, 7, or 8:
- Press and hold the side button until the Power off slider appears.
- Drag the slider, then wait 30 seconds for your device to turn off.
- To turn your device back on, press and hold the side button until you see the Apple logo.
- To restart your iPhone SE (1st generation), 5, or earlier:
- Press and hold the top button until the Power off slider appears.
- Drag the slider, then wait 30 seconds for your device to turn off. .
- To turn your device back on, press and hold the top button until you see the Apple logo.
When you have turned your iPhone back on, have a buddy call you to check if it rings after you have done so. How to Fix iPhone Yellow Battery.
iPhone isn’t Ringing and How to Fix it
Check The Ring/Silent Switch
The Ring/Silent switch being in the Silent Mode position is the most prevalent cause of an iPhone not ringing when it should. Silent Mode
When Silent Mode is activated, an orange band will appear next to the Ring/Silent switch, which is situated on the upper-left side of your device, right over the Volume buttons.
You may access Silent Mode by pressing and holding the Volume Down button. How to Fix iPhone Yellow Battery
To turn it off, press the switch so that it is towards the front of your smartphone. You will get a notification on your screen indicating that the Silent Mode has been turned off.
Check Your Volume Settings
If you have turned off Silent Mode but are still not hearing the ringtone on your phone, the volume setting for the ringer may be all the way turned down. Checking and adjusting your volume settings can be done as follows:
On the left side of your smartphone, just above the Volume Down button and just below the Ring/Silent button is where you’ll find the button labeled “Volume Up.” Press this button. There will be a bar graph displayed on the screen to keep track of your volume.
Swiping up from the bottom of the screen to activate the Control Center on your iPhone allows you to adjust the volume at any time, regardless of whether the device is locked or whether it is in use.
Turn Off Do-not Disturb
You will see a crescent moon icon in the status bar and on your Lock Screen while Do Not Disturb mode is activated, and your phone will not ring (with iPhone X, you will only see the icon in Control Center).
The following is the procedure to disable it:
When using iOS 15 or later:
- Press and hold the Focus icon on your Lock Screen.
- Go to Control Center, then tap Focus.
- Tap the Focus on that’s to turn it off.
For versions of iOS older than 14:
Go to Control Center, and tap the crescent moon icon to turn it off.
Switch Off Airplane Mode
Verify that the airplane mode on your phone is not active. If it is, the bell won’t ring. Navigate to Settings > Airplane Mode, and if the switch is activated, tap it to turn off the mode.
Turn Off Silence Unknown Callers
In iOS 13, Apple included a function that automatically ignores incoming calls from unknown numbers, making it easier to prevent receiving unwanted spam calls.
However, if you have Silence Unknown Callers switched on, the caller’s number won’t ring your phone if it isn’t saved in your contacts.
To deactivate this feature, navigate to Settings > Phone and then toggle the Silence Unknown Callers switch to the off position.
Make Sure The Number Isn’t Blocked
It’s possible that you’ve banned the number on your iPhone, which would explain why it doesn’t ring when someone calls. Unblocking a number on your iPhone can be done as follows:
- To block a contact, go to Settings > Phone > Blocked Contacts.
- Tap Edit.
- Tap the red circle beside the blocked number, and then tap Unblock.
Check Your Ringtones
If the issue persists, you could verify the ringtone that was set as the default. It’s possible that you’ll need to reinstall it. You can choose a new ringtone by navigating to Settings > Sounds & Haptics > Ringtone on your device.
Check any custom ringtones you may have set up on your phone, since this may be the cause of your phone not ringing when only one or multiple people call you:
- Navigate to the Phone > Contacts menu.
- After selecting the contact whose calls aren’t ringing, select Edit from the menu that appears.
- Tap the Ringtone button, then choose a different ringtone to assign to this contact.
Check Whether Bluetooth Devices Are Connected
If you are not hearing an incoming call, it is possible that your device is ringing throughout the call but sending the audio to another source, such as Bluetooth headphones or another device. This would explain why you are unable to hear the call.
By opening Control Center and then tapping the Bluetooth icon, you may easily disconnect from any and all Bluetooth devices without having to turn off Bluetooth itself.
Complete A Factory Reset
If you’ve already tried all of the advised repairs, but your iPhone still won’t ring, you can try doing a factory reset on your phone but keep in mind that this should be your absolute last choice.
There could be a malware infection on your device, which is quite unlikely, or there could be another issue with its performance.
When you perform a factory reset on your iPhone, practically all of the data that is stored on the device will be deleted.
Because of this, it is imperative that you first back up all of the information that is particularly vital to you.
How to Fix iPhone Yellow Battery 2024:Newshub360.net